Filter
Top Products
45
US
Chapter 8 Other Functions
Setting the speaker distance
You must set the distance from your listening position to
the speakers.
The available distance for a center and a surround speaker
depends on that of the front speaker.
The next list shows the selectable distance value of each
speaker. The list below describes the available setting for
each of speakers. The default adjustments are in
parentheses.
Speaker Distance
FRONT (10 ft/3.0m) Set this between 3 and 20 ft (0.9 m and
6.0 m) in 1 ft (0.3 m) increments
CENTER (10 ft/3.0m) Set this between 3 and 20 ft* (0.9 m and
6.0 m) in 1 ft (0.3 m) increments.
SURROUND Set this between 3 and 20 ft* (0.9 m and
(10 ft/3.0m) 6.0 m) in 1 ft (0.3 m) increments.
* The setup value may be different depending on the setup value
of the front speaker.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “SP.
DISTANCE” appears.
3 Press the “SP. DISTANCE” SELECT.
The Speaker distance setup Menu appears.
4 Select the distance between the Unit and the
speaker by pressing the “+” and “–” SELECT.
The distance gets longer or shorter by 1 foot each time
you press each of the “+” or “–” SELECT .
“No Exist” appears on the front panel display if you
set the size of the speaker to “NONE” in “Selecting a
speaker size.” (page 44)
Setting a speaker level
The Level Menu contains parameters that let you adjust
the balance and speaker volumes of each speaker. The
settings available in this menu are applied to all sound
fields. Be sure to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
Speaker Speaker level
SUB WOOFER (0 dB) Set this between –6 dB and +6 dB in 0.5
dB increments.
FRONT (BALANCE) The balance can be adjusted 8 steps in
left and right position.
CENTER (0 dB) Set this between –6 dB and +6 dB in 0.5
dB increments.
SURROUND L (0 dB) Set this between –6 dB and +6 dB in 0.5
dB increments.
SURROUND R (0 dB) Set this between –6 dB and +6 dB in 0.5
dB increments.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “LEVEL”
appears on the front panel display.
3 Press the “LEVEL” SELECT.
The Level setup Menu appears.
4 Adjust the speaker level by pressing each of the
“+,” “–,” “L,” or “R” SELECT.
The SELECT on the left side decrease the level in 0.5
dB steps. For front speaker adjustment, the SELECT
on the left side moves the speaker balance toward the
left.
The SELECT on the right side increase the level in 0.5
dB steps. For front speaker adjustment, the SELECT
on the right side moves the speaker balance toward
the right.
Continue to the next page
l