Filter
Top Products
19
BRIGHTNESS
CONTRAST
Video
S-Video
RGBS YCrCb RGB Grafico
HDMI™
RGBS 15kHz
YCrCb 15kHz
ADJUSTEMENTS
INPUTS
COLOR - -
-
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TINT
(NTSC)
SHARPNESS
SHARPNESS MODE
FILTER
Adjustable/can be set
Not adjustable/can not be set
CINEMA MODE
VIDEO TYPE
FLESH TONE CORRECTION
NOISE REDUCTION
-
-
-
-
-
-
-
TABLE 1 - INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
In
AUTO
the deinterlacer recognises if the video signal source
is a movie film (obtained from a Telecine device with 3:2 or
2:2 pull-down) and applies a deinterlace algorithm optimised
for this type of signal.
If the video signal source is not identified as a film, or if you select
NO
the deinterlacer applies a Motion compensated algorithm
optimised for video camera signals.
VIDEO TYPE
Activates a filter to improve stability of pictures from video
recorders. To toggle between
NORMAL, VCR1
mode and
VCR2
mode press on the remote control.
NOISE REDUCTION
This adjustments allows to choose the filter value for noise
reduction purposes.
As soon as this option is selected on the menu, the image is
divided in two parts.
In the left side the image is not altered by the filter, in the right
part the filter is activated.
This allows you to compare the effect of the filter.
It is possible to deactivated the filter (
NOT ACTIVE
), to use the au-
tomatic adjustments (
AUTO
) or to manually select (
MANUAL
) the
value suitable for the image with the
VALUE
adjustment.
In case of using the
VALUE
adjustement, it is enoght to select
to cursor below and set the value with the Á/Ë keys of the
remote control.
Associated to the
NOISE REDUCTION
there is the possibility to use
the specific function
(FLESH TONE CORRECTION)
to make skin tone
more natural. Often the use of noise reduction filter slightly
degrades the image in those areas where skin tones are vi-
sible. With the use of this function it is possible to maintain an
excellent image quality throughout the entire projected image.