Sharp SD-AS10 Stereo System User Manual


 
54
SD-AS10
Advanced Features
- Operating the connected TV -
Operating the connected TV
You can operate Sharp TVs with the remote control. Change the remote control set-
ting if operating other manufacturers' TV, or if you cannot operate a Sharp TV.
" Watching TV
Other buttons available for operating TVs
" Changing the TV registration
Notes:
! You cannot operate some Sharp TVs with the remote control.
! As for manufacturers with 2 or more setting numbers, select one with which you
can operate the TV.
! Once you set a number, the number previously memorized will be canceled.
! After replacing the batteries in the remote control, the registered number may
automatically be set to 1044 (SHARP). If it occurs, register the desired number
again.
! Registration cannot be executed depending on TVs. Even if numbers can be set,
some buttons may not work.
1 Press the TV ON/STAND BY button to turn on the TV.
2 Press the TV CH (- or +) button to set the channel.
Operation Button
Volume control
Switching the input
1 While holding down the TV ON/STAND BY button, set the MODE 1/
MODE 2 switch to MODE 1 and enter the manufacturer setting
number (4 digits).
2 Release the TV ON/STAND BY button.
The setting is registered and the TV can be operated with the remote control of
this unit.
(*): The default manufacturer number is 1044 (SHARP).
TV manufacturer Setting number TV manufacturer Setting number
SHARP 1011, 1025, 1044(*)
AIWA 1052
ADMIRAL 1037
AIKO 1019
AKAI 1009
ALARON 1031
AMBASSADOR 1029
AMPRO 1045
AMSTRAD 1034
ANAM 1004, 1024, 1035
ANAM NATIONAL 1024, 1035
AOC 1007, 1009
AUDIOVOX 1019, 1036, 1041
BAUR 1039
BELCOR 1007
BELL & HOWELL 1005, 1021
BROCKWOOD 1007
BROKSONIC 1032, 1037
CANDLE 1009, 1015
CARNIVALE 1009
CARVER 1014, 1026
CELEBRITY 1001
CINERAL 1019, 1036
CITIZEN 1009, 1011, 1015,
1016, 1019
CME 1039
CONCERTO 1015
CRAIG 1024
CROSLEY 1014
CROWN 1011