Sennheiser EM 300 G3 Stereo Receiver User Manual


 
Specifications
54
Specifications
RF characteristics
Modulation wideband FM
Frequency ranges 516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A–E, G, see page 5)
Receiving frequencies 1,680 receiving frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up to 24 factory-
preset channels, intermodulation-free
6 frequency banks, each with up to 24 user
programmable channels
Switching bandwidth 42 MHz
Nominal/peak deviation ±24 kHz/±48 kHz
Receiver principle true diversity
Sensitivity (with HDX, peak deviation) < 2 μV for 52 dBA
rms S/N
Adjacent channel rejection typ. 75 dB
Intermodulation attenuation typ. 70 dB
Blocking 75 dB
Squelch Off, 5 to 25 dBμV, adjustable in steps of 2 dB
Pilot tone squelch can be switched off
Antenna inputs 2 BNC sockets
AF characteristics
Compander system Sennheiser HDX
EQ presets
Preset 1: “Flat
Preset 2: “Low Cut –3 dB at 180 Hz
Preset 3: “Low Cut/High boost –3 dB at 180 Hz
+6 dB at 10 kHz
Preset 4: “High Boost”+6dB at 10kHz