Filter
Top Products
Adjustment tips and functions
38
The extended menu “Advanced Menu”
To get into the extended menu “Advanced Menu”:
̈ From the main menu, select “Advanced”.
Setting the receiving frequencies and the frequency banks “U1” to “U6
Via the “Tune” menu item, you can set a receiving frequency to be stored
in the current channel or you can select a different channel in one of the
frequency banks “U1” to “U6” and assign this channel a receiving
frequency.
Setting a receiving
frequency for the
current channel
̈ Set the desired frequency.
Squelch
Easy Setup Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Tune
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
When you have selected one of the system banks and then select
the “Tune” menu item, the receiver automatically switches to
channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6”
are not assigned a receiving frequency.
It is vital to observe the notes on frequency selection on page 44.
̈ Turn the jog dial until the “Tune” menu item appears.
̈ Press the jog dial.
The frequency selection appears.
̈ Press the jog dial.
Your settings are stored.
You are back to the operating menu.
Call up “Tune” Select the MHz value
and confirm
Select the kHz value;
store the setting
Advanced Menu
531.375 MHz
Tune
B.Ch: U1. 1
531.375 MHz
Tune
B.Ch: U1. 1
534.208 MHz
Exit
Tune
Sync Settings
“Stored”
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30