Filter
Top Products
Adjustment tips and functions
36
Entering a name
Via the “Name” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver.
The name is displayed on the “Receiver Parameters” standard display and
can consist of up to eight characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level
Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps
Via the “AF Out” menu item, you can adjust the level of the audio output
AF OUT from the receiver to the input of the connected device. The
following figures are a guide to the best settings:
Gain values greater than +18 dB should only be used when the audio
modulation from the transmitter is at a low level, otherwise the audio
output of the receiver may become clipped and distorted.
Squelch
Easy Setup Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
̈ Turn the jog dial to select a character.
̈ Press the jog dial to change to the next segment/character or to
store the complete entry.
Call up “Name”
Menu
Frequency Preset
Name
AF Out
Lichael
Enter a character and
confirm
Name
L ichael
Enter a character;
store the setting
Name
Michae l
“Stored”
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
Squelch
Easy SetupSetup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Connected device Guide values for “AF Out”
Line 0 to +18 dB (+24 dB)
Microphone −24 dB to −6dB