Filter
Top Products
Putting the receiver into operation
13
̈ Secure the rack mount “ears” ƿ to the sides of the receiver using the
previously removed recessed head screws (see right-hand diagram).
Fitting the
device feet
̈ Clean the base of the receiver where you want to fix the device feet.
̈ Fit the device feet to the four corners of the receiver as shown.
̈ Place the receiver on a flat, horizontal surface.
Connecting the
rod antennas
The supplied rod antennas Ƽ can be mounted quickly and easily and are
suitable for all applications where – good reception conditions provided –
a wireless transmission system is to be used without a large amount of
installation work.
̈ Connect the two rod antennas Ƽ to the BNC sockets º and µ at the
rear of the receiver.
̈ Align the rod antennas upwards in a V-shape.
ƿ
Do not fit the device feet when mounting the receiver into a
19” rack.
When using more than one receiver, we recommend connecting
remote antennas and, if necessary, using Sennheiser antenna
accessories. Fore more information, visit the ew G3 product page at
www.sennheiser.com.
XXX - XXX MHzFREQ. RANGE- X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER EM
5
00
IDENT. NO.: XXXXXX
IC: 2099A-XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682
XXX - XXX MHzFREQ. RANGE- X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER
EM
500
IDENT. NO.: XXXXXX
IC: 2099A-XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682
µ
Ƽ
º