Filter
Top Products
Putting the receiver into operation
16
To mount the receiver into a 19” rack:
̈ Slide the receiver with the mounted blanking plate into the 19” rack.
̈ Secure the rack mount “ears” ƿ to the 19” rack.
If you are using the supplied rod antennas:
̈ Align the antennas in a V-shape to obtain the best possible reception.
Rack mounting
two receivers
To mount the receivers into a rack using the GA 3 rack adapter:
̈ Place the two receivers side by side upside-down onto a flat surface.
̈ Secure the jointing plate to the receivers using six recessed head
screws (M 3x6).
̈ Secure the rack mount “ears” ƿ to the receivers as described on
page 12.
When rack mounting two receivers side by side, you can only front
mount the antennas when using the ASA 1 antenna splitter in
conjunction with the AM 2 antenna front mount kit and an addi-
tional GA 3 rack adapter (see “Accessories and spare parts” on
page 52).
We recommend using remote antennas.
ƿ
ƿ