RCA RTB1100 Home Theater System User Manual


 
Connections and Setup
Connecting AUDIO IN from External
Sources such as TV
Using AUDIO IN Jacks
Connect the AUDIO IN jacks from the unit to the
AUDIO OUT jacks on VCR, TV, SAT/Cable Box or
other component. Press either SOURCE button
on the main unit or AUX button on the remote
control to select AUX mode.
Digital Optical Input
Connect components capable of outputting
Dolby digital (e.g. TV or SAT/Cable Box) or stan-
dard PCM (CD) format digital signals. Use a  ber
optical cable for this digital audio connection.
(Cable not included).
Press OPTICAL button on remote control or
SOURCE button on main unit to select OPTICAL
for digital audio output components.
Connecting your player to a wired
router
Connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the ETHERNET jack on the back
of your player and to an Ethernet jack on a hub or
broadband router.
-8-
Notes:
Do not connect a modular phone cable to
the ETHERNET jack.
When plugging or unplugging the cable,
hold the connector on the end of the
cable. When unplugging, do not pull on
the cable. Press down the lock tab and pull
the connector out of the jack.
Because there are various connection
con gurations, follow the instructions from
your telecommunication carrier or Internet
service provider.
OR
OR
TV
SAT/
Cable BoxVCR
AUDIO OUT
Audio cable
(not included)
Red
White
LAN
Hub or broadband router
LAN cable
(not included)
English IB(A5).indd 10English IB(A5).indd 10 4/15/2010 20:19:114/15/2010 20:19:11