Filter
Top Products
-22-
Radio
The unit has a built-in tuner that allows for FM
radio function. The AM loop antenna allows for
AM radio function.
Manual tuning
1. Connect the FM antenna and the AM loop
antenna at the back of the unit.
2. Press TUNER button.
3. Tune a station by pressing TUNE
/ buttons
repeatedly until the desired station is found.
Alternatively, you can press and hold the
same buttons down for about two seconds
to activate the automatic search function. In
this mode the unit will automatically tune
frequencies until it nds a station.
4. Repeat step 3 to tune to another radio station.
5. Press TUNER button to toggle between FM and
AM.
Storing radio stations
The unit can store up to 30AM/30FM radio stations
in its memory. You can enter every single radio
station yourself or the unit can store all available
radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER button to enter the Tuner mode.
2. Press and hold TUNER button for two seconds
to start automatic preset programming.
3. Radio frequencies will be scanned and stored
automatically. When all the available radio
stations are stored or all 30AM/30FM memory
locations are full, the auto preset programming
function will stop.
Tips:
• When the FM station broadcasts Stereo
sound is found, ST is displayed.
• When you manually tune into a weak FM
station, press AUDIO button on remote
control to switch from Stereo to Mono
mode. This will reduce the background
noise.
• If there is any interference, change the
antenna’s position until ideal sound
reception is obtained. TV and other
electronic devices could be the cause
of interference, so try to position the
antenna away from them.
• A weak signal can a ect the Automatic
preset programming function’s
e ciency. Adjust the antenna for better
reception and a more e cient search.
Manual preset
1. Tune to a radio station (see Manual tuning for
details).
2. Press MEM/ANGLE button. While the Program
Preset number is still ashing, input your desired
preset number using the numeric buttons, then
press MEM/ANGLE button to store it.
Retrieving preset stations
1. Press TUNER button to enter the Tuner mode.
2. Press
/ buttons to search up or down for
the preset stations or directly press the numeric
buttons.
English IB(A5).indd 24English IB(A5).indd 24 4/15/2010 20:19:134/15/2010 20:19:13