Filter
Top Products
Connecting the Speakers
Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the ter-
minal and insert the wire. Release the tab to lock wire in the terminal.
Note:
When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the re-
ceiver) of speaker wires and terminals match. For example, red wire to red terminal on the
receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires
touch each other, it will damage the system’s ampli er.
Subwoofer
Purple and Black
Green and Black
Red and
Black
White and Black
Blue and BlackGray and Black
Rear Speakers
(Surround Sound)
Front Speakers
Right
Left
Center Speaker
Insert
Right Left
Press
Release
-9-
Connections and Setup
To adjust each speaker volume level for optimum listening experience.
(1) Press the LEVEL button on the remote control to select FL (front Left speaker).
(2) Press the or buttons to adjust the value up or down (between -10dB and +10dB).
(3) Repeat step (1) and (2) for the other speakers FR, SL, SR, CT, SW.
Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.
English IB(A5).indd 11English IB(A5).indd 11 4/15/2010 20:19:114/15/2010 20:19:11