Filter
Top Products
System Options and Preferences
64
Changing the Signal Source
The Signal Source menu allows you to choose the source from which you would like the
signal to come: Antenna A, Antenna B, or DIRECTV. The same can be accomplished using
the ANTENNA and INPUT buttons on your remote control. If you misplace your remote
control, use the front panel buttons to access this menu and change the signal source.
To access the Signal Source menu:
1. Press MENU on the remote control to access the main menu.
2. Select System Options from the main menu.
3. Select Signal Source from the next menu.
Select the appropriate signal source.
4. Use the arrows and OK to select which source you would like to receive a signal from:
Antenna A, Antenna B, or DIRECTV.
Changing the Signal Type
The Signal Type menu lets you choose whether you are receiving a signal from cable TV or
an off-air antenna. When you run Channel Search (see “Channel Search” in this section for
details), the HD receiver automatically detects your signal and you don’t have to specify it
here. However, if you decide to change the source, you will need to use the Signal Type
menu. Note that when your signal source is coming from DIRECTV, this menu will not be
available.
Select whether you are receiving signals from an off-air antenna or cable.