Filter
Top Products
Using the Profiles
53
The TV Setup
You can establish TV channel lists, set spending limits, and set rating limits for TV
programs using the TV Setup menu.
Editing Channels in a TV List
You can create a TV channel list to establish which TV channels (including both analog
and digital) the selected profile can access. To create the TV channel list:
1. Select a user.
2. Select TV Setup
3. Select Edit Channels.
To start, you can add or delete all channels.
4. Use the arrow buttons to highlight a TV channel, and press OK to remove (or
replace) the check mark. To go directly to a certain channel, enter its number using
the digits on the remote control. Or, page through the list using the channel up and
down buttons.
Checkmarked items appear in the channel list. In other words, when you select that
profile and begin surfing through TV channels, only the checkmarked channels will
appear as you surf. Note that the only channels you can add or remove from a list are
ones that were found during the channel search (see the “Getting Assistance” section for
details on automatically searching for channels).
Selecting or Deleting All TV Channels
You might be able to save time when creating a TV channel list by using the Select All
Chans option or the Delete All Chans option to either add or delete all channels before
removing or adding individual channels.
Also, terrestrial program providers may make additional channels or subchannels
available. To include new channels in your TV channel list:
1. Select System Options from the main menu, then select Channel Search. The system
will run a channel search, making it aware of the new channel(s).
2. Select Profiles from the main menu.
3. Select the user profile name, then TV Setup.
4. Choose Edit Channels and checkmark the new channel.
Don’t forget
about the CLEAR
button.
Press the CLEAR button
on the remote control to
remove the on-screen
menus.
Another way to add a
channel is to directly
tune to it using the digit
buttons on the remote
control. If the system can
obtain that channel’s
signal, it will be added
into the channel list.
Note that if you’re using
two terrestrial antennas,
pressing the ANTENNA
button on the remote
allows you to edit the
other antenna’s channel
list when you are in TV
mode.