Filter
Top Products
Setup and Connections
13
To make the connection:
1. Connect Audio/Video and S-Video cables (optional).
• Connect an Audio/Video cable from the HD receiver’s AUDIO Right, Left, and
VIDEO jacks to the AUDIO IN Right, Left, and VIDEO jacks on the back of the TV
or monitor.
• Connect an S-Video cable from the HD receiver’s S-VIDEO jack to the TV’s S-VIDEO
jack.
• Connect an Audio/Video cable from the HD receiver’s second set of AUDIO Right,
and Left, and VIDEO jacks to the second set of AUDIO IN Right, Left, and VIDEO
jacks on the VCR.
2. Connect coaxial cables.
• Connect a coaxial cable from the ANTENNA A (or B) jack on your HD receiver to
one output of a splitter. Then use another coaxial cable to connect the input jack
on the VCR, usually labeled IN FROM ANTENNA, to the other output of the
splitter. Connect the input of the splitter to your cable outlet, cable box, or
antenna using a third coaxial cable. If desired, connect another coaxial cable
from the vacant ANTENNA jack on the HD receiver to another RF signal.
• Connect a coaxial cable from your HD receiver’s SATELLITE IN jack to the satellite
dish antenna.
• Connect a coaxial cable from your TV’s antenna input jack, usually labeled
ANTENNA IN, to the VCR’s output jack, usually labeled OUT TO TV.