Filter
Top Products
Setup and Connections
10
To make the connection:
1. Connect Audio/Video and S-Video cables (optional).
• Connect an Audio/Video cable from the HD receiver’s AUDIO Right, Left, and VIDEO jacks to the AUDIO IN Right,
Left, and VIDEO jacks on the back of the TV or monitor.
• Connect the S-Video cable from the HD receiver’s S-VIDEO jack to the TV’s S-VIDEO jack.
2. Connect coaxial cables.
• Connect a coaxial cable from the ANTENNA A (or B) jack on your HD receiver to your cable outlet, cable box, or
antenna. If desired, connect another coaxial cable from the vacant ANTENNA jack on the HD receiver to another RF
signal.
• Connect a coaxial cable from your HD receiver’s SATELLITE IN jack to the satellite dish antenna.
• Connect a coaxial cable from your HD receiver’s OUT TO TV jack to the TV’s input jack, usually labeled ANTENNA IN.
Basic connection Using a Regular TV or Monitor
HD Receiver and Regular TV or Monitor
CAUTION
Do not stack electronic
components or other
objects on top of the HD
receiver. See Safety
Information on the inside
cover for details.
HD RECEIVER
REGULAR TV or MONITOR
SATELLITE DISH ANTENNA
ANTENNA IN
AUDIO
VIDEORL
S-VIDEO
ANTENNA
B IN
ANTENNA
A IN
OUT TO TV
VIDEO S-VIDEO HD MONITOR OUT
AUDIO
VCR
CONTROL
DIGITAL AUDIO
OUTPUT
PHONE JACK
SATELLITE
IN
ACCESS CARD
R
R
L
L
ALTERNATE RF SIGNAL
CABLE
IN
Optional
The ANT B and ANT A
jacks can receive both
digital and analog RF
signals.