Filter
Top Products
WARNING
To reduce the risk of fire or shock
hazard, do not expose this HD
receiver to rain or moisture.
To reduce the risk of electric shock, do not remove
cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates
"dangerous voltage" inside
the product that presents a
risk of electric shock or
personal injury.
This symbol indicates
important instructions
accompanying the product.
Important Information
Product Registration:
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and
model numbers in case you need them. The numbers are located on the back of the product.
Model No. _________________________________________________________
Serial No. _________________________________________________________
Purchase Date: __________________________________________________
Dealer/Address/Phone: ___________________________________________________________________________________
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Cautions
Do not stack electronic components or other objects on top of the HD
receiver. The slots on top of the receiver must be left uncovered to allow proper
airflow to the unit. Blocking the airflow to the unit could impair performance or
damage your receiver and other components.
Do not stack the HD receiver on top of a “hot component” such as an audio
power amplifier.
FCC Regulations state that unauthorized changes or modifications to this equipment may
void the user’s authority to operate it. This device complies with part 15 of the FCC rules.
Operation is subject to the condition that this device does not cause harmful interference.
Note to Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical
Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building as close to the point of cable entry as practical.
Note to Satellite Dish Antenna
Installer: This reminder is provided to call your attention to Article 810, and in particular Article 810-
15, of the National Electrical Code (which covers proper installation and grounding of
television receiving equipment) as well as to Article 820-40, which specifies that the
satellite dish antenna cable ground shall be connected to the grounding system of the
building as close to the point of cable entry as practical.
IMPORTANT NOTICE: This device incorporates an anticopy process technology that is protected by U.S. patents
and other intellectual property rights measures. The anticopy process is licensed for non-
commercial, home use only. Reverse engineering or disassembly
is prohibited.
Due to copyright restrictions, you may not be able to view some high definition programs
in high definition format using this product.
Care and Cleaning: Use a soft cloth or the dusting attachment of your vacuum cleaner to dust your
HD receiver.
Remove dust from both top and bottom ventilation holes.
Plastic surfaces are easily scratched and can be marred by alcohol and various solvents.
Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet
will accumulate more dust. A non-abrasive, anti-static cleaner/polisher is recommended.