Filter
Top Products
36 Creating Discs on a Mac
e. Print Settings will launch the Printer Driver settings
when clicked. These settings are described in detail in
section 4-E of this manual.
f. Set Print disc before recording/ Record disc before
printing. Record disc before printing is
recommended for most jobs to avoid printing on discs
that do not burn properly. Print Before Recording is
used for jobs involving Hockey Rink or Business Card
shaped CD-Rs where it is important to print before
recording for proper card alignment.
g. If using Kiosk Mode, choose whether or not to Print
"Reject" on Bad Discs in Kiosk Mode. When enabled,
this will cause a disc that has failed to verify to be
printed with the word REJECT prior to being ejected
from the publisher to make it easier for bad discs to be
identified in the output stack when using the Kiosk
Mode. If this option is not enabled, bad discs will be
ejected with no printing at all.
h. Select the Number of discs requested for this job.
i. Stop Job after Number of Writes Fail allows you to
decide how many consecutive failures the Publisher
will accept prior to canceling a job.
7. Once you have selected your image and chosen your
preferred settings in the Robot Write Pane, click Start to
begin recording your job. You can queue several different
jobs for recording if you like, this option is described in
Section 4-E of this manual.
510873PM.qxd 4/3/2006 4:56 PM Page 36
TOC
INDEX