Filter
Top Products
Creating Discs on a PC 19
If the Yellow, Magenta, Cyan or Black diagonal lines printed on
the disc show breaks, repeat the cleaning procedure. If nozzles
still appear to be clogged, remove the cartridge and gently
wipe the nozzle area sideways with a clean water-dampened
cloth. If after several cleanings a color still does not appear on
the test print, the cartridge may be damaged or empty and
may need to be replaced.
Select the Change button to install a fresh, new ink cartridge or
to switch back and forth between previously used cartridges.
After the cartridge has been replaced according to the
instructions on page 10, Step 3: Installing Ink Cartridges, select
either the New Cartridge Installed button or the Old
Cartridge Installed button accordingly. These selections are
necessary for the printer to accurately keep track of ink
cartridge ink levels.
Select the Details button for information on the drivers,
firmware, alignment and number of discs printed with
your Publisher.
Disc Output Location
This can be set either Normal (Left Bin acts as output), or
Kiosk (finished discs deposited out the Front Exit). The default
is Normal (Left Bin). Note that this will only have an effect
when doing printing only − this will have no affect when
recording and printing through PrimoDVD. In PrimoDVD,
click Robotics then Options and select Kiosk Mode check box.
510873PM.qxd 4/3/2006 4:56 PM Page 19
TOC
INDEX