Filter
Top Products
Customizing SoundStructure Designs
5 - 5
fit into the next smaller SoundStructure device requires removing audio chan-
nels from the “Edit Channels” control.
Channels Page
The channels page is the primary area for customizing the signal gains and
processing for the input, output, and submix signals. Regardless of the
number of SoundStructure devices used in a design, there is only one channels
page and that page shows all the virtual channels for the entire design. A typ-
ical channels page is shown in the following figure.
The input and output signals are shown with different colored outlines to
make it easy to differentiate among inputs, outputs, and submixes. The signals
are color coded so that the input signals have a green shading and outline and
the output signals have a blue shading and outline to match the rear-panel
labeling. The submixes have a purple shading and outline. See the following