Polycom C8 Speaker System User Manual


 
Command Protocol Reference Guide
A - 43
phone_auto_answer_en Enable Auto-Answer For Telephony Interface
Description
This parameter enables (1) or disables (0) the auto-answer feature for the
telephony interface.
Examples
phone_connect Connect Or Disconnect Telephony Interface
Description
This parameter sets the connection status of the telephony interface. Setting
the phone_connect status to 1 connects the call, while setting it to 0 disconnects
the call.
Examples
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Analog Telephony Input
Virt Chans Mono
Default 0
Command Response Description
set
phone_auto_answer_en
"Phone In" 1
val
phone_auto_answer_en
"Phone In" 1
Sets the phone associated with the virtual channel
"Phone In" to autoanswer when the phone rings. Note
that the phone in virtual channel name must be used, not
the phone output virtual channel name.
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Analog Telephony Output
Virt Chans Mono
Default 0
Command Response Description