Filter
Top Products
Command Protocol Reference Guide
A - 71
Dynamics Processing Parameters
Description
Dynamics processing is available on all physical channels except the signal
generator and AEC reference. Dynamics processing includes a compressor,
limiter, expander, gate, and peak limiter. An additional input gain parameter
is provided to change the gain of the signal before the dynamics processor.
dp_en Enable Dynamics Processing
Description
This parameter enables (1) or disables (0) all the dynamics processing for the
specified virtual channel.
dp_gate_attack Gate Attack Time
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Default 0
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo