Polycom C8 Speaker System User Manual


 
Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 74
dp_gate_ratio Gate Ratio
Description
This parameter sets the ratio of the target gain applied by the gate versus the
difference between the input signal level and the gate threshold. For example,
if the gate ratio is 10 (i.e., 10:1) and the input signal level is 6 dB below the gate
threshold, the gate applies -60 dB of gain.
dp_gate_thresh Gate Threshold
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-point
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1.0, Maximum:100.0, Resolution: 0.1
Default 100.0
User Limits
Supported
No
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-point
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Default -100
User Limits
Supported
No