Polycom C8 Speaker System User Manual


 
Command Protocol Reference Guide
A - 97
sig_gen_tone_freq Signal Generator Tone Frequency
Description
This parameter sets the frequency (in Hz) of the sine wave produced by the
signal generator when its sig_gen_type is set to tone.
sig_gen_type Signal Generator Type
Description
This parameter sets the type of signal produced by the signal generator. The
options are pink noise (pink), white noise (white) a sine wave at a single
frequency (tone) and a sine wave swept across a range of frequencies (sweep).
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
System Limits Minimum: 20.0, Maximum: 20000.0, Resolution: 0.1
Default 1000.0
User Limits
Supported
No
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
Values pink : Pink Noise (default)
white : White Noise
tone : Sine Wave
sweep : Sine Wave Sweep