Filter
Top Products
Other connections
08
61
En
Important
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won’t be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See
The Input
Setup menu
on page 63 and
SR+ Setup for Pioneer
plasma displays
on page 65 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN
jack of this receiver with the
CONTROL
OUT
jack of your plasma display.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also
SR+ Setup for Pioneer plasma displays
on
page 65 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
iPod or XM Radio functions are selected.
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See
Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you’ve connected the receiver in
The Input
Setup menu
on page 63.
2 To switch SR+ mode on/off, press
RECEIVER
, then
the SR+ button.
The front panel display shows
SR+ ON
or
SR+ OFF
.
• The automatic volume muting feature is enabled
separately; see
SR+ Setup for Pioneer plasma displays
on page 65.
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-84TXSi
MASTER
VOLUME
PHASE
CONTROL
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STANDBY/ON
INPUT
SELECTOR
PHASE
CONTROL
MCACC
POSITION
AUTO SURR/
STREAM DIRECT
DIGITAL PRECISION
PROCESSING
DVD player
Pioneer plasma
display
This receiver
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
SAT
AUDIO IN
DVD/LD
AUDIO IN
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
DVD SAT
VIDEO 1 TV CONT
DVR1 i Pod
TUNER
RECEIVER
CD
DVR2
CD-R
TV VIDEO 2
XM RADIO
ROOM2/3
SLEEP
+
10
SR
+
ANALOG
ATT
DISC
VIDEO
SEL
DIMMER
S.RETRIEVER
CLASS
D.ACCESS
ENTER
TUNE
TUNE
ST ST
ENTER
AV PARAMETER
TOP MENU ì
DTV MENU
CH LEVEL
MENU
T.EDIT
BAND
GUIDE
RETURN
SETUP
CATEGORY
ì
VSX_84TXSi.book.fm 61 ページ ２００６年３月１３日 月曜日 午前１１時５４分