Filter
Top Products
Controls and displays
04
23
En
Display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO
lights when the receiver is set to select the input
signal automatically (page 30).
2 Program format indicators
These change according to which channels are active in
digital sources.
L
– Left front channel
C
– Center channel
R
– Right front channel
SL
– Left surround channel
S
– Surround channel (mono)
SR
– Right surround channel
SBL
– Left surround back channel
SB
– Surround back channel (mono)
SBR
– Right surround back channel
LFE
– Low frequency effects channel (the
((( )))
indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSD
PCM
lights during DSD (Digital
Stream Direct) to PCM conversion with SACDs).
4
OVER
/
ATT
OVER
lights to indicate that the level of an analog source
is too high.
ATT
lights when you use the attenuator
(
ANALOG ATT
) to reduce it.
5
MULTI-ROOM
Lights when the multi-room feature is active (page 57).
6
VIDEO CONV.
Lights when digital video conversion is switched on (see
Setting the AV options
on page 66).
7 V.SB
Lights during Virtual surround back processing
(page 30).
8 Sound processing indicators
Light according to the active AV parameter(s) (page 66).
9
TUNER
indicators
TUNED
– Lights when a broadcast is being received.
STEREO
– Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO
– Lights when the mono mode is set using
the
MPX
button.
10 Master volume level
Shows the overall volume level.
–80dB
indicates the
minimum level, and
+12dB
indicates the maximum level.
11 Input source indicators
Light to indicate the input source you have selected.
12
STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 29).
13 Speaker indicators
Lights to indicate the current speaker system,
A
and/or
B
(page 55).
14 Listening mode indicators
THX
– Lights when one of the Home THX modes is
selected.
ADV. SURROUND
– Lights when one of the
Advanced Surround modes has been selected.
STEREO
– Lights when stereo listening is switched
on (see
Listening in stereo
on page 29).
STANDARD
– Lights when one of the Standard
Surround modes is switched on (see
Listening in
surround sound
on page 27).
15
SLEEP
Lights when the receiver is in sleep mode (page 68).
16 Matrix decoding format indicators
2
PRO LOGIC IIx
– This lights to indicate
2
Pro
Logic II /
2Pro Logic IIx decoding (page 27).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 27).
17 Character display
Displays various system information.
18
SR+
Lights when the SR+ mode is switched on (page 61).
21 3 876 91011
171312 15 1816
4
5
14
SIGNAL
L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP
AB
HDMI
DIGITAL
STREAM
PRO LOGIC
DIGITAL
WMA9 Pro
CD
CD-R
TUNER
PHONO
MULTI IN
iPod
DVD
TV
SAT
DVR
VIDEO
[
1
]
HDMI
[
2
]
[
4
][
3
]
USB XM
SR+
DSD PCM
96/24
DTS
VIDEO
MULTI-ROOM
OVER ATT
TONE
MONO
dB
Hi-bit/sampling
DIALOGUE LOUDNESS
STEREO
CONV. V.SB DNR
MIDNIGHT TUNED
N
eo
: 6
2
2
DIRECT
ANALOG
VSX_84TXSi.book.fm 23 ページ ２００６年３月１３日 月曜日 午前１１時５４分