Filter
Top Products
Additional information
12
82
En
Error Messages
Sound is mono only. • Check that the tuner is not set to FM mono (see
Improving poor FM
reception
on page 35).
Considerable noise in radio
broadcasts.
• Tune into the correct frequency.
• Connect the antenna (see
Connecting the supplied antennas
on
page 18 and
Connecting external antennas
on page 77).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see
Connecting external antennas
on page 77).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see
AM loop
antenna
on page 18 and
Connecting external antennas
on page 77).
• Turn off any other equipment that may be causing the noise or move
it away from the system unit.
• The tuning interval is incorrect for your country or region. Try
switching the tuning interval (frequency step) (see
Changing the
frequency step
on page 73).
Problem
Remedy
Message Desciption
Child Lock
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See
Child Lock
on page 73 for
more on switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited
because the Recording Mode is on (see
Recording mode
on page 78).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited
because headphones are connected.
96K Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited
because there is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited
because the sound is muted (see
Muting the sound
on page 41).
Exit
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
XV-HDT330_new.book 82 ページ ２００３年１月１６日 木曜日 午後４時１２分