Pioneer S-HTD330 Speaker System User Manual


 
Connecting up
02
15
En
The illustration below shows typical
speaker placement for a surround sound
system.
Make sure that all speakers are securely
installed. This not only improves sound
quality, but also reduces the risk of
damage or injury resulting from speakers
being knocked over or falling in the event
of external shocks such as earthquakes.
The front, center and surround speakers
supplied with this system are
magnetically shielded. However, placing
them extremely close to a television may
result in color distortion on the screen. If
this happens, move the speakers a little
further away and switch off the television
for 15–30 minutes.
The subwoofer is not magnetically
shielded and so should not be placed
near a TV or monitor.
Wall-mounting the center and
surround speaker system
Before mounting
Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in
the speaker falling. Make sure that the
wall you intend to mount the speakers on
is strong enough to support them. Do not
mount on plywood or soft surface walls.
Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight
of the speaker.
If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
Pioneer is not responsible for any
accidents or damage that result from
improper installation.
Front R
Front L
Surround L Surround R
Sub-
woofer
Center
Wood screw
Protrusion: 5-7mm
5 mm
5 mm
10 mm
XV-HDT330_new.book 15 ページ 2003年1月16日 木曜日 午後4時12分