Filter
Top Products
Connecting up
02
19
En
• It’s also possible to fix the AM antenna to
a wall using two screws (see illustration
below). Before fixing, make sure that the
reception is satisfactory.
FM wire antenna
• Connect the FM wire antenna to the
FM UNBAL 75
Ω
terminal in the same way
as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don’t drape
loosely or leave coiled up.
• The signal ground (
) is designed to
reduce noise that occurs when an
antenna is connected. It is not an
electrical safety ground.
Connecting the power
Before connecting the power and switching
on for the first time make sure that everything
is connected properly.
1 Plug one end of the supplied power
cable into the AC INLET.
2 Plug the other end into a household
power outlet.
• See
Connecting auxiliary components
on
page 77 for details of other connections
you can make with this system.
AC IN
AM LOOP
AN TENNA
FM
UNBAL
75
Power outlet
XV-HDT330_new.book 19 ページ ２００３年１月１６日 木曜日 午後４時１２分