Filter
Top Products
Surround sound setup
09
61
En
Chapter 9
Surround sound setup
Setting up surround sound
The Room Setup feature (page 27) is
designed to give you a basic surround sound
setup, however you can make the more
detailed settings that may improve the
surround sound in your listening room.
1 Press SYSTEM SETUP (SHIFT + HOME
MENU).
2 Use the
/
(cursor left/right)
buttons to choose the setting you want to
adjust.
The current setting is shown for each option
as you cycle through the display. See below
for a full list and description of each.
3 Use the
/
(cursor up/down)
buttons to adjust the setting.
4 Repeat steps 2 and 3 to make other
settings.
5 When you’re done, press ENTER to
leave the System Setup menu.
• The System Setup menu is exited
automatically after 5 minutes of inactivity.
System Setup menu options
Below are all the available settings in the
setup menu. The first setting in each section
is the default. See also the notes in each
section for additional information about the
settings.
Front speakers distance setting
Specifies the distance from your listening
position to the front speakers:
•
Front 1 ft.
~
Front 30 ft.
– Distance can
be set in increments of 1 ft. The default is
10 ft.
Center speaker distance setting
Specifies the distance from your listening
position to the center speaker:
•
Center 1 ft.
~
Center 30 ft.
– Distance
can be set in increments of 1 ft. The
default is 10 ft.
Surround speakers distance setting
Specifies the distance from your listening
position to the front speakers:
•
Surr. 1 ft.
~
Surr. 30 ft.
– Distance can
be set in increments of 1 ft. The default is
10 ft.
SYSTEM SETUP
SHIFT
ENTER
XV-HDT330_new.book 61 ページ ２００３年１月１６日 木曜日 午後４時１２分