Filter
Top Products
Getting started
04
35
En
3 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
•
Manual tuning
: Press
TUNE +/–
repeatedly to change the displayed
frequency.
•
Auto tuning
: Press and hold
TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the
next station it finds. Repeat to search for
other stations.
•
High-speed tuning
: Press and hold
TUNE +/–
until the frequency display
starts to move rapidly. Keep the button
held down until you reach the frequency
you want. If necessary, fine tune the
frequency using the manual tuning
method.
• You can use the
and
buttons on the front panel instead of the
TUNE +/–
buttons.
Improving poor FM reception
If you’re listening to an FM station in stereo
but the reception is weak, you can improve
the sound quality by switching to mono.
1 Press SYSTEM SETUP (SHIFT + HOME
MENU).
2 Use the
/
(cursor left/right)
buttons to choose ‘FM Mode?’, then press
ENTER.
3 Use the
/
(cursor up/down)
buttons to select ‘Mono’ or ‘Auto’, then
press ENTER.
Select
Auto
in step
3
to switch back to auto-
stereo mode (the stereo indicator lights when
receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the
/
(cursor left/right)
buttons to choose ‘St. Memory?’ then
press ENTER.
4 Use the
/
(cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
• If you are using the front panel controls,
press
TUNER FM/AM/ST.
until you’re in
station preset mode, then use the
and
buttons to select a station
preset.
XV-HDT330_new.book 35 ページ ２００３年１月１６日 木曜日 午後４時１２分