Filter
Top Products
Playing audio and video discs
06
45
En
• The picture quality when using frame
reverse is not as good as frame advance.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When changing direction with a DVD
disc, the picture may ‘jump’. This is not a
malfunction.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD-Video and DVD-RW)
that form a loop which is played over and over.
• You can’t use A-B Repeat with WMA/MP3
discs, Video CDs in PBC mode,
unfinalized CD-R/RW discs, or VR format
DVD-RW discs.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘A-B Repeat’ from the list of
functions on the left.
3 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
4 Press ENTER on ‘B(End Point)’ to set
the loop end point.
After pressing
ENTER
, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
5 To resume normal playback, select
‘Off’ from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see
Creating and editing a
DVD program list
on page 47 and
Creating and
editing a non-DVD program list
on page 49).
• Repeat play is not available with Video
CDs in PBC mode, or unfinalized CD-R/
RW discs.
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
XV-HDT330_new.book 45 ページ ２００３年１月１６日 木曜日 午後４時１２分