Filter
Top Products
Using the timer
08
58
En
Chapter 8
Using the timer
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct time
for the wake-up timer to work properly
(see
Setting the clock
on page 27).
1 Select the source you want played.
For example, press
TUNER
(
TUNER
FM/AM/
ST.
on the front panel) to select the radio as
your source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
3 Set the volume.
4 Press TIMER (SHIFT + 6) twice to reach
the timer menu.
5 Use the
/
(cursor left/right)
buttons to select WAKE-UP then press
ENTER.
6 Use the
/
(cursor left/right)
buttons to select TIMER EDIT then press
ENTER.
7 Set the switch-on time.
Use the
/
(cursor up/down) buttons to set
the hour, then press
ENTER
. Set the minute in
the same way, pressing
ENTER
when you’re
done.
8 Set the switch-off time.
Use the
/
(cursor up/down) buttons to set
the hour, then press
ENTER
. Set the minute in
the same way, pressing
ENTER
when you’re
done.
After pressing
ENTER
this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (
DVD/CD
, etc.) and
volume are confirmed in the display.
STANDBY/ON
L1/L2FM/AM
SHIFT
VOLUME
DVD/CD
ENTER
ENTER
TUNER
TV LINE
TIMER
XV-HDT330_new.book 58 ページ ２００３年１月１６日 木曜日 午後４時１２分