Filter
Top Products
40
En/ChH
Using Sound Modes and Effects5
Playing other stereo sources with DSP
effects
You can add room effects to audio CDs and other stereo
sources using the DSP modes. Different effects work
better with different kinds of music, so don’t be afraid to
experiment a little.
• The DSP effects cannot be used with 96kHz/24-bit
sources, or in combination with a surround mode.
• When playing stereo sources with DSP effects
switched off, there is no sound from the surround and
center speakers.
1 Press DSP repeatedly to select a sound
mode.
The display shows the current DSP mode.
•
HALL1
Large, wood-paneled concert hall sound.
•
HALL2
Large, stone-walled concert hall sound.
•
JAZZ
Live jazz club sound.
•
DANCE
Nightclub sound.
•
THEATER1
Classic, mid-size movie theater sound.
•
THEATER2
Large, modern movie theater sound.
•
SIMUL.STEREO
Virtual stereo for mono sources.
2 If necessary, adjust the effect level.
• Select
EFFECT from the Sound menu and adjust
using the 5 and ∞ buttons. Press
ENTER to set the
level.
EFFECT 7O
You can adjust the effect level in the range of 10 to 90 in
steps of 10.
÷
÷
1
DSP
÷
HALL1
÷
HALL2
÷
JAZZ
÷
DANCE
÷
THEATER1
÷
THEATER2
÷
SIMUL.STEREO
2
÷
EFFECT
5 ∞
ENTER
EFFECT 7O