Filter
Top Products
34
En/ChH
Getting Started4
Naming station presets
For easier identification, you can name your station
presets.
1 Recall the station preset you want to
name.
See Listening to station presets on the previous page for
how to do this.
2 Press SYSTEM MENU and select TUNER
MENU.
TUNER MENU
• Change menu options using the 2 and 3 buttons.
Press
ENTER to select the currently displayed option.
3 Select STATION NAME from the tuner
menu.
STATION NAME
• Change menu options using the 2 and 3 buttons.
Press
ENTER to select the currently displayed option.
4 Press DISP/CHARACTER to change the
character set.
You can switch between alphabet (upper case), alphabet
(lower case), numbers and symbols.
5 Use the 5 and ∞ buttons to change the
displayed character; press ENTER to
select it.
ST 1 A
ST 1 R
ST 1 RA
• Press CLR to clear a character.
• Use the 2 and 3 buttons to move the cursor in the
display.
• You can also use the number buttons to select
characters. See the diagram on page 31 for which
buttons correspond to which characters.
6 Enter the rest of the station name in the
same way.
7 When you’re done, press SYSTEM MENU
to exit.
1
2
SYSTEM MENU TUNER MENU
TUNER MENU
÷ 2 3
ENTER
3
STATION NAME
STATION NAME
÷ 2 3
ENTER
4
DISP/CHARACTER
5 5 ∞
ENTER
ST 1 A
ST 1 R
ST 1 RA
÷ CLR
÷ 2 3
÷
6
7
SYSTEM MENU