Filter
Top Products
36
En/ChH
Getting Started
4
STANDBY
/ON
V1/V2/V3
VIDEO
DIRECT PLAY 3
MD TAPE
ENTER
32
SYSTEM
MENU
5
∞
• For detailed instructions on using
the optional MD or tape deck, see the
included operating instructions.
• For more on controlling your TV
using this remote control, see page 25.
Reducing the auxiliary
input level
If a component you connected to an
analog input causes the sound to
distort, the input level is probably too
high. You can reduce it by turning on
the video input attenuator.
1 Switch the system into
standby.
2 Press SYSTEM MENU and
select VIDEO ATT.
• Change menu options using the 2
and 3 buttons. Press
ENTER to select
the currently displayed option.
3 Use the 2 or 3 button to
select VIDEO 1, 2 or 3 ATT,
then press ENTER.
4 Select ATT ON or ATT OFF
as required.
• Change menu options using the 5
and ∞ buttons. Press
ENTER to select
the currently displayed option.
÷
÷
1
2
SYSTEM MENU
VIDEO ATT
÷ 2 3
ENTER
3 2 3
VIDEO
1,2 3 ATT ENTER
4
ATT ON ATT
OFF
÷ 5 ∞
ENTER