Filter
Top Products
74
Using Other Functions
Using the front panel with the MULTI-ROOM system
1
Press the MULTI ROOM & SOURCE button.
The display shown below will illuminate when the receiver is in
STANDBY mode.
Also, the MR&S button will light.
2
Press the CONTROL button.
The light will start to blink.
3
Within ten seconds of step 2, select the FUNCTION
with the INPUT SELECTOR.
For this example we’ll use the TUNER function. The display shown
below will illuminate.
The INPUT SELECTOR steps through the functions in the following
order:
TUNER MD/TAPE 1VCR 1
TV/SATDVD/LD CD
4
Press the CONTROL button again and use the INPUT
SELECTOR to adjust the VOLUME.The volume can be
adjusted in a range of -82dB to 0dB.
The display will appear as shown below.
5
When in TUNER function, press the CONTROL button
and use the INPUT SELECTOR to tune in the station.
The display will appear as shown below.
Turn the input selector until you get:
312
4
If you don't turn the multi
room function off you won't
be able to turn the entire
system off.