Filter
Top Products
68
Using Other Functions
Setting up the direct function
The direct function is designed in case you have an external video source connected to your TV (a video source
that is not going through the VSX-D908S). For this explanation we’ll call this the “external video deck.” You’d
like to control external video deck with this unit’s remote control so you’ve assigned it a function button (for
example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you’ll get no picture on your
TV because the external video deck signal is not going through the VSX-D908S. To get around this problem you
set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the
external video deck with the remote but the receiver does not go into VCR 2 mode.
1
Press REMOTE SETUP and
4
at the same time to
select the DIRECT FUNCTION mode.
Direct Function
You can choose whether
the commander sends a
function code or not ,
when you press each
Multi-control button.
1Select function.
2Input YES or NO.
TRANSMIT YES =1
NO =2
EXIT=Remote setup
2
Select a component by pressing it’s MULTI CONTROL
button.
3
Set the DIRECT FUNCTION of each external source to
NO by pressing
2
.
4
Press REMOTE SETUP to exit the DIRECT FUNCTION
mode.
The default setting is all YES. If you have turned a DIRECT
FUNCTION to NO and want to turn it back to YES, follow the
directions above and press
1
in step 3.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DTV ON/OFF DTV MENU
EXIT
DISC+10
GUIDE
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
73
1¡4¢
+
-
+
-
+
-
8
1,4
1
3
2
Using the system off button
This button will turn off the receiver and any component that has programmed into the SYSTEM
OFF settings (see above) as well as turn off all PIONEER components regardless of whether they
have been programmed into SYSTEM OFF. If you use this feature when a DVD is playing, the player
will stop the play mode before switching off.
1
Press the SYSTEM OFF button on the remote
control.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATIONTUNING
BAND
SYSTEM
OFF
Î
¶
73
+
-
+
-
8
1