Filter
Top Products
18
Display
All the display information is explained and/or referenced here.
1 SIGNAL SELECT indicators
Light to indicate the type of input signal assigned
for the current component (see “Front Panel”, %,
SIGNAL SELECT).
ANALOG : Lights when an analog signal is
selected.
DIGITAL : Lights when a digital audio signal is
selected (DVD/LD, CD, MD/TAPE1, TV/SAT,
VCR1, VCR 2).
AC-3 : Lights when a source with Dolby Digital
signals is played.
DTS : Lights when a source with DTS audio
signals is played.
2 Analog level indicators
OVER : If “ANALOG” is selected in SIGNAL
SELECT, this indicator lights to show that an
excessively strong signal is being processed.
When this occurs, press INPUT ATT on the front
panel to attenuate (lower) the signal. Also, when
“DIGITAL” is selected in SIGNAL SELECT, this
indicator lights to show that a source containing
an excessive amount of information is being
processed. If this occurs, see p. 38.
ATT : Lights when INPUT ATT is used to reduce
the level of the input signal (available in ANALOG
mode only).
3 LOUDNESS indicator (See p.44)
Lights when the LOUDNESS mode is on.
4 MIDNIGHT indicator (See p.42)
Lights when the MIDNIGHT LISTENING mode is
on.
5 Radio Frequency/Function indicator
Displays the function or the frequency of the
current radio station.
6 DSP indicator (See p.37, 38)
Light when a DSP or Advanced Theater mode is
selected.
7 STEREO indicator (See p.37, 38)
Lights when a STEREO mode is selected.
8 2 Surround/dts mode indcators
2 DIGITAL : When the 2 Surround/dts mode
on the receiver is on, this indicator lights to
indicate playback of a Dolby Digital signal.
However, 2 PRO LOGIC lights during 2 channel
playback of Dolby Digital.
2 PRO LOGIC : When the 2 Surround/dts
mode on the receiver is on, this indicator lights
during 2 channel playback. ( Both B or A+B
speaker systems turn off automatically when
headphones are plugged in.)
DTS : Lights when DTS signals are input.
9 MASTER VOLUME indication
Displays current level of master volume.
0 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
- Program Format indicator
When a Dolby Digital or DTS signal is input, he
following indicators light to show the channels
being played back.
L : Left front*
1
*
2
, C : Center*
1
, R : Right front*
1
*
2
,
LS : Left surround*
1
, S : Surround (mono)*
2
,
RS : Right surround*
1
*1: Indicates 5.1ch Dolby Digital or DTS playback.
*2: Indicates Dolby Pro Logic playback.
DIGITAL
dB
PRO LOGIC
STEREO
DSP
MIDNIGHTLOUDNESSATTSIGNAL
SELECT
OVER
H.P
AC-3DTS MPEG
ANALOG
SP AB
L
C
R
LFE
LS
S
RS
DIGITAL
MONO STEREO
TUNED AMFM
TAPE 2
VOLUME
H.P
SP AB
1
23 4567 9
80
-
=~ !
@#
Displays & Controls