Filter
Top Products
24
On Screen Display
There are a number of possible ways to hook up the receiver to your video components, like a DVD player, and
hook up to your receiver to your TV, but some of them won't allow you to use the on-screen display of this unit.
To avoid this one simply needs to follow two rules.
Setting Up for Surround Sound
To ensure the best possible surround sound, be sure to complete the following set up operations. This is
particularly important when using the DTS, 2 (Dolby) Surround sound modes. You only need to make these
settings once (unless you change the placement of your current speaker system or add new speakers, etc.).
These set up operations use your TV to display the settings and choices so be sure your TV and receiver are
properly hooked up.
1
Turn on the receiver and your TV.
Make sure your TV is set to the receiver.
2
Press SYSTEM SETUP button.
The SYSTEM SETUP MENU appears on your TV screen.
System Setup
[Speaker Setting]
[Channel Delay]
[Channel Level]
[Crossover Network]
[Bass Peak Level Manager]
[D-Range Control]
[Digital-In Select]
[Multi-Room]
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
* You can escape from this screen at any time by pressing the
SYSTEM SETUP button again. None of the settings you made will
be entered in this case.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DTV ON/OFF DTV MENU
EXIT
DISC+10
GUIDE
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
73
1¡4¢
+
-
+
-
+
-
8
2
1
Surround Sound Set Up
1 Always use the same type of video cords to hook up your video components to the receiver as you use to
hook up the receiver and your TV. For example, if you use composite video cords to hook up your DVD and
the receiver, use composite video cords to hook up the receiver to your TV. If you use S video cords to hook
up your DVD and the receiver, use S video cords to hook up the receiver to your TV.
2 Always make sure your TV is set to the appropriate input channel (for example, video 1). Your TV may have a
number of input channels and if you don't select the proper one you won't be able to use this receiver's on-
screen display, or, in fact, see any picture from this receiver at all. If you are unsure how to choose an input
channel for your TV, refer to the manual which came with your TV.
You might, for example, use both composite and S video cords to hook up your video components with this
receiver and then use composite video cords to hook up this receiver to your TV. This arrangement would still
NOT let you see the on screen displays from this receiver on your TV. The best idea is just to use one type of
video cord for all your video component and TV hook ups.