Filter
Top Products
67
Using Other Functions
OPERATION
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DTV ON/OFF DTV MENU
EXIT
DISC+10
GUIDE
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
73
1¡4¢
+
-
+
-
+
-
8
2
1
4
1
5-
2
5-
1
3
System OFF
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with
the push of only one button on the remote control. For example, you can program the unit to stop your DVD,
turn off your TV, turn off your DVD player and turn off the receiver itself. You don't need to program in other the
power for PIONEER components, they will go off automatically in this mode. The receiver itself will go off
automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
Be sure to recall or teach the remote control commands for each component before attempting MULTI
OPERATIONS (see “Setting Up the Remote Control to Control Other Components,“ p. 65).
1
Press REMOTE SETUP and
3
at the same time
to select the MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen.
The MULTI CONTROL and the SYSTEM OFF buttons start
to blink.
To cancel MULTI OPERATION SETUP mode
Press REMOTE SETUP.
2
Press the SYSTEM OFF button
The SYSTEM OFF button will blink.
3
Press the MULTI CONTROL button for the
component whose operation you want to start
SYSTEM OFF with (for example, TV CONT
button).
The selected button will light steadily.
4
Press the operation, for example TV (POWER),
you want to input.
5
Repeat steps 3 and 4 to input SYSTEM OFF for
the components and commands you want to
input.
You can repeat this process for up to five commands.
For example : you could enter the following two operations
using the proceeding steps 3 and 4.
1 Press TV CONT button & TV
(POWER) to turn off
your TV (as explained above).
2 Press DVD/LD then
SOURCE (POWER) to turn off your
DVD player (if it is not a PIONEER product).
When you employ SYSTEM OFF (see below), these two
tasks will be performed in the same order.
To exit SYSTEM OFF SETUP mode
Press REMOTE SETUP