Filter
Top Products
7
PREPARATION
Preparing the Remote Control
Loading the batteries
Load the batteries into the remote control as shown below.Please use alkaline batteries.
When you notice a decrease in the operating range of the remote control, replace all batteries with new ones.
Before You Start
Operating range of remote control unit
The area in which you can use the remote control to operate the VSX-D908S is fairly large. To use, point the
remote control toward the remote sensor on the front panel of this unit while within the range shown below.
23 feet (7 m)
12
3
Remote control may not function properly if:
• There are obstacles between the remote
control and the remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver located near a device
emitting infrared rays.
• Operated simultaneously with another
remote control which uses infrared rays.
Opening the Front Panel
To open the front panel push gently on the lower third of the panel with your finger.
30°
30°
CAUTION!
Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following
precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries properly according to the marks in the battery case.
• Batteries with the same shape may have different voltages. Do not use different batteries together.