Filter
Top Products
73
Using Other Functions
OPERATION
MULTI-ROOM set up
After you have completed the necessary connections for MULTI-ROOM operation you need to set up the
receiver for such operation. Follow the instructions below. The following page explains how to use the MULTI-
ROOM function once it’s set up.
1
Turn on your TV and the receiver.
Make sure your TV is set to the receiver.
2
Press SYSTEM SETUP on the remote control.
The REMOTE SETUP MENU appears on your TV screen. You can
escape from this screen at any time by pressing SYSTEM SETUP
again.
Multi-Room
Volume Level
[VARIABLE]
IR Receiver
[PIONEER]
[EXIT]
CAUTION : If the "FIXED"
position is chosen, the
volume will be loud.
3
Use the 5¥∞ buttons to select the MULTI-ROOM set
up mode and press ENTER.
4
Select the VOLUME LEVEL by using the 2¥3 buttons.
If you hook up a just a power amplifier in the sub room the VSX-
D908S will act as a pre-amp. In this case choose VARIABLE for the
VOLUME LEVEL setting. If you hook up a full integrated amplifier in
the sub room (such as another Pioneer VSX receiver) choose FIXED
for the VOLUME LEVEL setting.
5
Select the IR RECEIVER type with the 5¥∞ buttons
and select the type by using the 2¥3 buttons.
If you have the Pioneer-made MR-100 select PIONEER. If you have
an IR RECEIVER from a different company, select OTHER.
6
Move to the EXIT setting and press ENTER to exit
MULTI-ROOM set up and return to normal operations.
You can leave the MULTI ROOM set up mode any time by pressing
the SYSTEM SETUP button.
Some IR RECEIVERS may not work with this system, check
with a PIONEER representative to be sure.
CAUTION!
If the MULTI ROOM is set to FIXED the volume on the main unit
will be set to maximum. Thus, when output, it will be extremely
loud. Please set the master volume controls of the integrated
amplifier in the sub room very low at first and experiment to find the
correct volume.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DTV ON/OFF DTV MENU
EXIT
DISC+10
GUIDE
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
73
1¡4¢
+
-
+
-
+
-
8
1
1
3,4,5
2,6