Pioneer DEH-P9650MP Stereo System User Manual


 
Using BBE sound
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
With BBE sound processing technology, you
can adjust the level of BBE.
1 Press AUDIO to select BBE.
Press AUDIO until BBE appears in the display.
2 Press a to turn BBE on.
# Tocancel the BBE, pressb.
3 Press c or d to adjust the level of BBE.
Each press of c or d increases or decreases
the level of BBE.
+4 4 is displayed as the level is increased
or decreased.
Note
Manufactured under licensefrom BBE Sound,
Inc. The mark BBEis a trademark of BBE Sound,
Inc.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the dis-
play.
2 Press a to turn loudness on.
LOUD:ON appears in the display.
3 Press b to turn loudness off.
LOUD:OFF appears in the display.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press AUDIO to select ASL.
Press AUDIO until ASL appears in the display.
Press AUDIO and hold until second audio
menu appears in the display, then press
AUDIO until ASL appears in the display.
2 Press a to turn ASL on.
ASL: ON appears in the display.
# Toturn ASL off, pressb.
3 Press c or d to select the desired ASL
level.
Each press of c or d selects ASL level in the
following order:
Low (low)Mid-Low (mid-low)Mid (mid)
Mid-High (mid-high)High (high)
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Audio Adjustments
En
48
Section
08