Pioneer DEH-P9650MP Stereo System User Manual


 
2 Press c or d to select the repeat range.
Press c or d untilthe desired repeat range ap-
pears in the display.
! Magazine repeat Repeat all discs in the
multi-CD player
! Trackrepeat Repeat just the current
track
! Disc repeatRepeat the current disc
Notes
! If you select otherdiscs during repeat play,
the repeat play rangechanges to
Magazine repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, therepeat play
range changes to Discrepeat.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
Magazine repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select
Random mode.
Press FUNCTION until Random mode ap-
pears in the display.
3 Press a to turn random play on.
The light comes on. Tracks will play in a ran-
dom order within the previously selected
Magazine repeat or Disc repeat ranges.
# Toturn random play off,press b.
Scanning CDs and tracks
While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Magazine repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Scan mode.
Press FUNCTION until Scan mode appears in
the display.
3 Press a to turn scan play on.
The light comes on. The first 10 seconds of
each track of the current disc (or the first track
of each disc) is played.
4 When you find the desired track (or
disc) press b to turn scan play off.
The light goes off. The track (or disc) will con-
tinue to play.
# If the display hasautomatically returned to
the playback display,select Scan mode again by
pressing FUNCTION.
Note
After track or discscanning is finished, normal
playback of thetracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
Multi-CD Player
En
32
Section
07