Pioneer DEH-P9650MP Stereo System User Manual


 
Playing a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press EJECT.
CD loading slot appears.
# After a CD hasbeen inserted, press SOURCE
to select the built-inCD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loadingslot
EJECTbutton
# You caneject a CD by pressing EJECT.
# If the front panelis in the eject position
(shown above), buttonsother than EJECT,
VOLUME, OPEN, andATT (on the remote con-
trol) do not operate.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
4 To perform fast forward or reverse,
press and hold c or d.
# If you select Roughsearch, pressing and
holding c or denables you to search every 10
tracks in the currentdisc. (Refer to Selectingthe
search method on page20.)
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CDplayer plays one, standard, 12-
cm or 8-cm(single) CD at a time. Donot use
an adapter when playing8-cm CDs.
! Do not insertanything other than a CD into
the CD loadingslot.
! There is sometimesa delay between starting
up CD playbackand the sound being issued.
When being readin, Format read is dis-
played.
! If you cannot inserta disc completely or if
after you insert a disc the discdoes not play,
check that thelabel side of the disc is up.
Press EJECT to ejectthe disc, and check the
disc for damagebefore inserting it again.
! If the built-in CDplayer does not operate prop-
erly, an error messagesuch as ERROR-11
may be displayed.Refer to Understanding
built-in CD player error messageson page 60.
! You caneject the CD by pressingand holding
EJECT with ejectposition when the CD load-
ing or ejectingcannot operate properly.
Built-in CD Player
En
17
English
Section
05