Pioneer DEH-P9650MP Stereo System User Manual


 
Scanning folders and tracks
While you are using Folder repeat, the begin-
ning of each track in the selected folder plays
for about 10 seconds. When you are using
Disc repeat, the beginning of the first track of
each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Scan mode.
Press FUNCTION until Scan mode appears in
the display.
3 Press a to turn scan play on.
The light comes on. The first 10 seconds of
each track of the current folder (or the first
track of each folder) is played.
4 When you find the desired track (or
folder) press b to turn scan play off.
The light goes off. The track (or folder) will con-
tinue to play.
# If the display has automatically returned to
the playback display,select Scan mode again by
pressing FUNCTION.
Note
After track or folder scanningis finished, normal
playback of thetracks will begin again.
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Press a to turn pause on.
The light comes on. Play of the current track
pauses.
# Toturn pause off, pressb.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select Compression.
Press FUNCTION until Compression appears
in the display.
2 Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
COMP/BMX OFFCOMP 1COMP 2
COMP/BMX OFFBMX 1BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select Search mode.
Press FUNCTION until Search mode appears
in the display.
MP3/WMA/WAV Player
En
26
Section
06