Filter
Top Products
Playing MP3/WMA/WAV
1
23
4
5
These are the basic steps necessary to play an
MP3/WMA/WAV with your built-in CD player.
More advanced MP3/WMA/WAVoperation is
explained starting on page 25.
1 MP3/WMA/WAV indicator
Shows when the MP3/WMA/WAV file is
playing.
2 Folder number indicator
Shows the number of folder currently play-
ing.
3 Track number indicator
Shows the track (file) currently playing.
4 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file).
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
1 Press EJECT.
CD loading slot appears.
# After a CD-ROM has beeninserted, press
SOURCE to selectthe built-in CD player.
2 Insert a CD-ROM into the CD loading
slot.
Playback will automatically start.
CD loadingslot
EJECTbutton
# You caneject a CD-ROM by pressing EJECT.
# If the front panelis in the eject position
(shown above), buttonsother than EJECT,
VOLUME, OPEN, andATT (on the remote con-
trol) do not operate.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
4 Press a or b to select a folder.
# You cannotselect a folder that doesnot have
an MP3/WMA/WAV filerecorded in it.
# Toreturn to folder 01(ROOT), press and hold
BAND. However, if folder 01 (ROOT)contains no
files, playback commences with folder02.
5 To perform fast forward or reverse,
press and hold c or d.
# This is fast forward andreverse operation only
for the file beingplayed. This operation iscan-
celed when theprevious or next file is reached.
# If you select Roughsearch, pressing and
holding c or denables you to search every 10
tracks in the currentfolder.(Refer to Selecting the
search method on page26.)
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
MP3/WMA/WAV Player
En
23
English
Section
06