Filter
Top Products
Additional information 13
55
En
Error Messages
Using the language code list
Some of the language options (see Language
settings on page 42) allow you to set your
preferred language from any of the 136
languages listed in the Language code list.
1 Switch the system on.
2 Press the
DVD/CD
button and select DVD.
Make sure the disc tray is empty.
3Use
/
to select either a code letter or
a code number.
4Use
/
to select a code letter or a code
number.
See the Language code list below for a
complete list of languages and codes.
Files don’t show up in
the Navigator/Photo
Browser.
• The files must have the correct file extension: .mp3 for MP3 files; .wma for WMA
files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or lower-case is OK).
• Make sure the file permission hasn’t been restricted (through a password, etc.).
Problem Remedy
Message Description
KEY LOCK • This message appears when the front panel buttons are pressed when the Key
lock feature is active. See Optional system settings on page 46 for more on switching
on/off the Key lock.
PHONESIN • An operation is prohibited because headphones are connected.
MUTING • An operation is prohibited because the sound is muted.
EXIT • Appears briefly when a menu is automatically exited when the microphone or
headphone are inserted.
USB ERR • See Important in Using the USB interface on page 35 for more on this.
NO MIC • A karaoke feature is prohibited because no mic is connected.
MIC IN • An operation is prohibited because the mic is connected.
SND. DEMO • The sound demo is on. See General in Troubleshooting on page 52.
TRAYLOCK • The tray lock is on. See General in Troubleshooting on page 52.
EEP ERR • Contact your Pioneer authorized service center or your dealer for servicing.
CANNOT • An operation is prohibited because DVD/CD or USB isn’t selected, headphones
are connected, or TEST TONE (SHIFT+RETURN) is pressed during disc playback.
CX303_505_500.book Page 55 Wednesday, June 27, 2007 2:39 PM