Filter
Top Products
Note
You can also use a and b to recall stations as-
signed to preset tuning keys P01 to P12.
Storing the strongest broadcast
stations sequentially
1 Touch A.MENU and then touch
FUNCTION MENU to display the function
names.
2 Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, touch BSSM
again.
3 Touch ESC to return to the TV picture.
# To return to the previous display, touch BACK.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.
Digital Signal Processor
Introduction of DSP adjustments
You can use this unit to control multi-channel
processor (e.g. DEQ-P8000), which is sold sepa-
rately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
Important
When a multi-channel processor and an optional
DVD player are connected to this unit, be sure to
use an optical cable (e.g., CD-AD600).
1
1 DSP display
Shows the DSP function names.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
Available accessories
En
76
Section
04