Pioneer AVH-P5900D Stereo Receiver User Manual


 
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch DIGITAL ATT to switch the digital
attenuator setting.
Touch DIGITAL ATT repeatedly until the de-
sired setting appears in the display.
! HIGH High quality sound
! LOW Minimize distortion sound
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch AUDIO RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
Other Functions
Introduction of system
adjustments
1
1 System menu display
Shows the system function names.
1 Touch A.MENU and then touch
SYSTEM MENU to display the system func-
tion names.
The system function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
2 Touch ESC to return to the display of
each source.
# To return to the previous display, touch BACK.
Changing the wide screen mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
1 Touch WIDE MODE on the system
menu.
2 Touch the desired wide mode setting.
3 Touch ESC to hide the touch panel keys.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:3 TV picture (normal pic-
ture) without any omissions.
Operating this unit
En
44
Section
03